VB-TS_Install Biblioteca audio cascadeaudio

For best results, take measurements of area to be treated prior to any modification of VB-TS roll.

TOOLS:

CAE recommends cleaning the surface once more with an ammonia based, aerosol

cut with either scissors or a razor knife. Remove the release liner

When VB-TS is being used in an underhood application, it is most effective when adhered

Preparation:

Please Note:

PH: 541-389-6821 - FX: 541-389-5273

Complete the installation by removing excess material that would interfere with normal operation of any hinges

with warm, soapy water to remove any dirt or dust particles.

Tape measure

VB-TS / VB-TSXL

and apply to the prepared surface. For larger surfaces, pull release

Cut the VB-TS roll to fit the panel to be treated. VB-TS may be

Tech Tip:

liner down about 6 inches and apply to surface in 6 to 8 inch

or latching mechanisms.

increments.

Scissors or razor knife

sales@cascadeaudio.com

Installation:

Be sure to clean the surface of automotive body panels by washing thoroughly

www.cascadeaudio.com

022004-LO-R1

Installation:

glass cleaner to remove unwanted wax and grease.

Product must be installed within one year for best performance.

to the outer edge and structural ribbing only.