VB-1X_Install Biblioteca audio cascadeaudio

Please Note:

· Be sure to clean the surface of automotive body panels by

sales@cascadeaudio.com

TOOLS

spray application tools in a dust free environment.

PH: 541-389-6821 - FX: 541-389-5273

Smooth plastic panels should be roughened with 80-grit

Apply VB-1X to surface in layers approx. 1/32" to 1/16" thick.

are painted prior to application.

If installing both VB-1X and TG-1:

material has cured sanding may become necessary. Store

022004-LO-R1

Clean up achieved with warm water, however once the

surface once more with an ammonia based, aerosol glass

> Apply VB-1X to the inside of loudspeaker enclosures to seal and damp enclosure walls. An additional .5 to

Preparation:

sandpaper (No PTE) prior to spraying. Ensure all metal surfaces

Additional Installation Tip:

VB-1X may be applied with the SG-1 spray gun for maximum speed and efficiency.

When utilizing the SG-1 spray gun, remember to keep the air pressure set

As the material dries, (2-4 hours), its color will change from

Installation:

www.cascadeaudio.com

washing thoroughly with warm, soapy water to remove

environment for material to become completely waterproof.

install VB-1X first and then top coat with TG-1.

Note:

or paintbrush / roller

Compressor

VB-1X

any dirt or dust particles. CAE recommends cleaning the

cleaner to remove unwanted wax and grease.

applied with a paintbrush or roller. In either method, do not thin the product.

purple to black. Allow up to seven days in a moisture free

between 60 80 psi. If a spray application tool is not available, VB-1X may be

1.5db of output gain can be achieved in most enclosures by minimizing the amount of internal losses.

SG-1 spray application tool

Product must be installed within one year for best performance.

Installation: