TG-1_Install Biblioteca audio cascadeaudio

will also vary with different methods of application. Do not recoat until prior coat is

possible before application of ThermaGuard.

When properly mixed it will have a smooth, creamy consistency, with no

Also: If installing both VB-1X and TG-1:

gallon on smooth metal surfaces. Coverage will vary on textured surfaces. Coverage

Paintbrush / roller

Please Note:

slowly with the solid material. DO NOT THIN THE PRODUCT. Use low speed when

ThermaGuard

mixing ThermaGuard. Failure to do so will destroy the insulating qualities of the product.

TOOLS:

Power drill

www.cascadeaudio.com

Installation:

completely dry. Dry times depend on surface conditions and humidity. Do not apply to

Clean up drips and splatters immediately with a mild detergent

Flush spray equipment with cool water until clear and clean.

PH: 541-389-6821 - FX: 541-389-5273

and warm water. Wash tools and hands with soap and water.

present (from storage) on the top, poke through to the bottom of the container and pull

Note:

the fluid from the bottom to the top approx. 4 8 times. The fluid must be blended

022004-LO-R1

lumps or foreign matter it will not resemble ordinary paint!

Mixing paddle

Apply at 42° or above on clean dry surfaces. Coverage will average between 50-60ft² per

Proper surface preparation is important. The surface should be as clean as

temperatures over 300°.

install VB-1X first and then top coat with TG-1.

Installation:

Compressor

Note: Protect the vehicle from overspray, drips or splatter.

Preparation:

Attach a standard "Mud" style mixing paddle to a ½" electric drill. If any crust is

Material must be installed within one year for best performance

sales@cascadeaudio.com