SG-1_Instructions Biblioteca audio cascadeaudio

counter clockwise until the inner locking mechanism releases it from the body of the gun.

the body of the spray gun and rinse with warm water. If there is an

sales@cascadeaudio.com

making clean up a quick and convenient process.

Loading:

1. Once you've completed application, remove the quart container from

www.cascadeaudio.com

4. Adjust air pressure between 60 80 psi to control spray pattern and texture.

4. After having cleaned the SG-1 spray gun thoroughly, wipe dry with a

gallon. This lowers the viscosity and will allow the material to be applied easily.

and from within the gun via the nozzle.

022004-LO-R1

2. Pour material to be sprayed into the quart container

Cleaning:

The SG-1 spray application tool from Cascade Audio Engineering is designed to spray

nozzle allows the SG-1 to spray VB-1X and ThermaKote. The gun disassembles easily

warm to hot water to remove residue quickly and completely.

high and low viscosity, liquid based materials. A large diameter draw tube and "big mouth"

quart container, simply fill with water and let stand for approximately

clean cloth and store in a dust-free environment.

SG-1 Spray Gun Instructions

accumulation of material on the bottom and sides of the inside of the

3. Be sure to also rinse out the draw tube that runs down into the quart

five minutes.

3. DO NOT THIN THE PRODUCT!

Note: If spraying the original VB-1 Paste, you must first thin the damping compound with 1 cup of water per

2. Unscrew the nozzle from the tip if the gun and thoroughly rinse with

underneath a stream of water, residue may be flushed out of the tube

PH: 541-389-6821 - FX: 541-389-5273

container. By holding the body of the spray gun upside down directly

1. With a firm grip on the 1 quart container and on the body of the gun, simply turn the container

water. Also rinse out the chamber directly behind the nozzle. Use