SB-TileAD_tech 3 | Biblioteca audio cascadeaudio

Carpet, Under-carpeting & Rubber Flooring Adhesive

adhesive is or has frozen, do not stir or use the product until it has completely thawed.

WARRANTY

As the carpeting or rubber floor covering is being installed, immediately wipe-off wet adhesive smudges and excess adhesive

Although this adhesive is freeze-thaw stable to -18°C (0°F), it should be protected from freezing like any water-based latex products. If the

3 of 3

Category: Acoustic Flooring

SB-TileAD

DURO disclaims all other warranties, expressed or implied, including the warranties of merchantability and fitness for a particular purpose.

PROTECTION

Do not allow adhesive to dry on the carpet or flooring surface, as cured adhesive is more difficult to remove.

PROTECT FROM FREEZING

The buyer's sole remedy for non compliance with this warranty shall be for the replacement of the product or refund of the buyer's purchase

SB-TileAD

dried.

price. In no case will DURO be liable for direct, consequential, economic or other damages.

Protect floors from traffic for at least 24 hours.

NOTE: Generally, at room temperature and 50% Rh conditions, this adhesive will dry in about 24 hours.

CLEAN UP

Promptly clean tools and hands with water while the adhesive is fresh.

Avoid unnecessary walking on the floor during the installation.

from the surface with a WHITE cloth dampened with water while the adhesive is wet or with mineral spirit if the adhesive has

Technical Data Sheet

Solvent-Free "Hi-Tack"