Hardwood_iso_tile_max 4 | Biblioteca audio cascadeaudio

The second method is carried out in two steps.

the acoustic sealer. Or you can simply use the acoustic sealer.

a knife.

Use an acoustic sealer to fill the 3/8" (9 mm) space completely

Prepare 7"-wide (178 mm) etafoam strips. Install them before setting the

For the first two methods, place a matchboard on the floor. Install the

to the covering in order to fill the 3/8" (9 mm) empty space around the

must never touch the floor covering. For those who have used etafoam as

sealer over the backer rod up to the level of the covering. This

Use 1/2" (13 mm) backer rod and insert it in the 3/8" (9 mm)

any obstacles.

method give you a better result than the first.

soundproofing, fold it down onto the floor and then put the baseboard over

The third method is the best.

it. Nail the baseboard to the wall and delicately cut the excess etaform with

covering. Whatever type of covering you use, keep your 3/8" (9 mm) space out from the wall as well as around

To optimize the acoustic properties of SB-IsoTileMax, the baseboards

panel on the floor. Then apply an acoustic sealer behind the etaform up

To maximize the efficiency of your acoustic panels, you must take great care when installing your new floor

up to the covering. Do the same thing for any obstacles.

baseboard and nail it to the wall.

space. Do the same thing for the obstacles. Apply the acoustic

Here are three ways of doing this procedure:

The first is very simple.

room. For the obstacles, fill the empty space with backer rod and apply