CAP_Instructions Biblioteca audio cascadeaudio

After the charge voltage climbs to at least 8 volts, the trigger wire

Connect cable from positive terminal on CAP to positive

www.cascadeaudio.com

Installation:

Turn on the head unit and touch the audio system

DIGITAL MONITOR INSTRUCTIONS

CAP. Voltage will climb as the CAP charges.

CAP.5 / CAP-1

Monitor Installation:

www.cascadeaudio.com

Maximum CAP-1 terminal torque is 50 inch lbs. or 6mm.

sales@cascadeaudio.com

022004-LO-R1

void the warranty!

Maximum CAP.5 terminal torque is 20 inch lbs. or 1.6mm.

Connect the ground terminal.

12 Volt Capacitors

connection on amp. Connect negative cable from CAP to

turn-on wire to the square touch pad on the top of the

CAP 1

Be sure to observe proper polarity when connecting cables!

FX. 541.389.5273

Cascade Audio Engineering: PH. 541.389.6821

Use heavy positive and negative cables with heavy duty 1/4 in. terminals

negative connection on amp.

for the CAP posts. Do not drill through CAP body or block vent hole.

Mount CAP as close to the amplifier as possible.

PH: 541-389-6821 - FX: 541-389-5273

Reverse polarity connection will damage the CAP and

CAP Installation:

may be removed. Permanently connect turn-on wire to terminal marked "T".