Cinema11 19 | Biblioteca audio caryaudio

AUTO SOUND SETUP test on your

12. VOLUME: Press this button to adjust the volume up and down from -90dB to +15dB.

the current broadcast band/reception

9. INPUT SELECTOR: Use these buttons

modes available for the selected format.

4. TUNER SEEK (UP/DOWN): Up:

menus.

FM, use this button to scan frequencies

center to confirm selections made in the

system.

2. TUNER SCAN: If INPUT is set to AM or

3. MEMORY: Press this button to store

8. SETUP: Calls up the Setup Menu on the

13. INPUT SEEK: Press this button to auto select the next active audio input source.

This section explains how best to use the remote control to set up and operate the Cinema 11.

CONTROLS AND DISPLAYS

Cinema 11 display, if active.

NAVIGATION buttons to move through

frequency into memory.

display. Press the ENTER button in the

to select the desired source for your Cinema 11.

that have been PRESET. The scan will

6. NAVIGATION/ENTER: Use the four

to select a surround format. Press the same button again to cycle through the various processing

7. TEST: Press this button to start an

order. Down: Performs tuning in

descending frequency order.

the Cinema 11 OFF.

REMOTE CONTROL

menu options shown on the Cinema 11

cycle through the stations, starting with

Performs tuning in ascending frequency

11. SURROUND/DATA FORMAT: Press the PLIIx, SUR. MODE, NEO:96/24, or CES 7.1 button once

1. POWER OFF: Press this button to turn

the current station, one after another

Room Equalization ON or OFF.

10. MUTE: Press this button to mute the main volume of the Cinema 11.

with 5 second delays.

5. ROOM EQ: Press this button to turn the