reading on the Volt Ohm Meter (VOM) or DC current meter if the reading is different
_" bias plug
amplifier chassis. Connect the bias cable red alligator clip to the positive (+) connection
Note: Bias is factory preset to 60 mA. Bias should be reset when
than 60 mA. Check and readjust to 60 mA again after the CAD-805 amplifier is warmed
WITH THE AMP OFF: Insert the _" bias meter plug into the bias jack on the back of the
on your meter. Check the 300B tube bias current reading and adjust for a 60 mA
up for 10 minutes. Remove the _" plug from the bias jack and enjoy the music!
Set the bias to 60
installing a replacement
background image
Page 9
on your meter. Connect the bias cable black alligator clip to the negative (-) connection
milliamperes, dc ampere scale.
<< < [Pag.9] >

Esta version es la html del arhivo pdf CAD805AE, genearada por domotica.name desde www.caryaudio.com

Archivos relacionados:306Series CAD120S CAD211AE CAD500-200 CAD805 CAI1 CD306_tas CINEMA_P7_Se CPA1 Cad280SA_V12 Cad805C_V2 Cinema1 Cinema11 Cinema11_RS2 Cinema5 Cinema6.5_DV Cinema6.7_HT Cinema_Catal ConceptSerie DVD7 DVD7_020107_ DVD7_IRCodes DVD7_RS232Pr DVD8 NewAmps_Cine PH302 PH_301_MKII_ Rocket88R SLI80 SLI80_tss SLP03_Techsh SLP05 SLP308 SLP98 SLP98_V1 V12r cad308sa cd301 cinema5manua flyerCinema1 slp2002 audio acousticmagic acousticsfirst amina aperionaudio audiocontrol audioquest audioshare.net auralex bowers-wilkins bryston.ca caryaudio casatools cascadeaudio chillsound conextionsystems definitivetech eliteavdist furmansound lindelectronics martinlogan monitoraudiousa mseaudio nilesaudio noble-fidelity phasetech psaudio puristaudiodesign qsonix russound sheersoundcable sherbourn sonance ticcorp triadspeakers truaudio vdn-otl