Specifications_Banners-Baffles 3 | Biblioteca audio auralex

b) Other: Provide materials necessary for alternate permanent mounting to ceilings as

a) Examine surfaces to receive work of this section. Do not begin installation until

3/3

a) After installation of acoustical units, clean all dirty surfaces, using cleaning materials and

3.2. Installation

End of Section

03/04/2007

b) Replace damaged components as directed by the Architect.

3.3. Adjust and Clean

a) Install units on ceilings in locations and in patterns indicated on the drawings.

3.1. Examination

unsatisfactory conditions have been corrected.

described in acoustical treatment design documentation.

Execution

printed instructions, using approved mounting methods.

a) Grommets or washers: Provide hardware for permanent mounting to ceilings.

2.3. Mounting Components

methods acceptable to manufacturer.

b) Install each unit as indicated on shop drawings and in accordance with manufacturer's

panel installation, remove all crates, cartons, packages and debris from the project site.

c) Remove debris caused by work of this section on a daily basis. At completion of acoustical