Specifications_AbsorptivePanels 5 | Biblioteca audio auralex

a) Examine surfaces to receive work of this section. Do not begin installation until

2. Length: 48 inches (1 219.2 mm).

6. Front side pattern: Wedges.

2. Length: 48 inches (1 219.2 mm).

7. Color: Charcoal Gray, Purple, Plum, Forest Green, Kelly Green, Blue, Orange, Red,

2.5. Mounting Components

4. Edges: Square.

panel installation, remove all crates, cartons, packages and debris from the project site.

03/04/2007

ceilings as described in acoustical treatment design documentation.

2. Length: 12 inches (304.8 mm).

and dry. Drywall surfaces, if not painted, shall be sanded and primed.

7. Color: Charcoal Gray.

unsatisfactory conditions have been corrected. Mounting surfaces shall be smooth, clean

c) Remove debris caused by work of this section on a daily basis. At completion of acoustical

e) VenusTM Bass Trap. Solid open-celled polyurethane foam panel.

5/5

3. Height: 6 inches (152.4 mm).

Burgundy, or Brown.

1. Wideness: 24 inches (609.6 mm).

Execution

4. Edges: Square.

b) Replace damaged components as directed by the Architect.

6. Front side surface: Grooved.

SonoColumnsTM Bass Trap. Solid open-celled polyurethane foam panel.

c) Cuts shall be made using an electric carving knife ensuring visibility of seams is minimized.

Alternate are unacceptable.

b) Install each panel as indicated on shop drawings and in accordance with manufacturer's

a) Adhesive: Provide Auralex FoamtakTM, TubetakTM, or Tubetak ProTM for permanent mounting.

methods acceptable to manufacturer.

3. Height: 12 inches (304.8 mm).

5. Corners: Square.

a) After installation of acoustical panels, clean all dirty surfaces, using cleaning materials and

4. Edges: Chamfered.

a) Install panels on walls and ceilings in locations and in patterns indicated on the drawings.

3.1. Examination

5. Corners: Square.

1. Wideness: 12 inches (304.8 mm).

3. Height: 24 inches (609.6 mm).

5. Corners: Square.

7. Color: Charcoal Gray, Purple, Burgundy, or Blue.

3.2. Installation

3.3. Adjust and Clean

printed instructions, using approved adhesive.

End of Section

b) Other: Provide materials necessary for alternate permanent mounting to walls and/or

6. Front side pattern: Deep wedges.