echoes are minimized without significantly reducing acoustic energy in the space.
For superior acoustics, Auralex suggests mounting LENRDTM Bass Traps in the corners of your room
between the listening position and the studio
Remember that these are only guidelines. If you have furniture or gear in the way, simply work around it as best you
following general guidelines:
LENRDs, Studiofoam and T'Fusor Diffusors in the room will improve your mixing or recording environment. Other, less
treatment on the ceiling between the mix position
reference monitors as pictured. Be sure to rotate
MoPAD monitor isolation pads.
products such as our MAX-WallTM Mobile Acoustical Environment and isolation products such as a GRAMMA amp riser or
T'Fusors for easy removal later.
2" to 3" gap between the LENRDs so that you reap the benefits from the exposed edges. If you have doors, windows or
and the back wall. You may desire to focus the
and the studio reference monitors.
Around the mix position, you might want to try
room surfaces with scientifically designed surfaces of varying shapes, sizes and angles. Standing waves and flutter
using the "mirror" method to place panels (see
A. Using FoamtakTM Spray Adhesive, mount three (3) LENRD Bass Traps in each vertical corner. We suggest you install
Do not worry about placing treatments very low on the walls--use them at ear level and on the ceiling for best results.
the ceiling behind the mix position or centered
Other General Suggestions
can. Auralex acoustic control products are very forgiving. Placement on the walls is not an exact science. Just having
(10) 2'x2' panels mounted across the front wall, creating a visually
each T'Fusor 90o from the adjacent one for best results. T'Fusors combat hot spots and nulls by alleviating flat, reflective
other obstacles blocking your corners, it is acceptable to place them in the
B. Using Foamtak, mount Studiofoam panels on the front wall, between
When treating the front and side walls, try using a mirror to ascertain the reflection points. Simply have a friend move a
and behind the studio reference monitors. The graphic below illustrates
permanent methods, such as VelcroTM, nails, pins, screws, etc. can be used to mount the LENRDs, Studiofoam panels or
the LENRDs starting at the ceiling. However, we understand that not all corners are the same. You may desire to leave a
The Auralex Acoustics Roominators Pro Plus Kit
Visit the "FAQs" section of www.auralex.com for great tips and information about Auralex products and services.
are either on the rear wall and rear portion of
in the reflection is a likely surface to treat with an Auralex Studiofoam panel!
If your room is set up with a mix position against one wall preferably in the center of the shortest wall, please use the
below).
Thanks again for purchasing the Auralex Roominators Pro Plus Kit!
General Guidelines
identical, but similar coverage across this wall is strongly encouraged.
D. Mount the remaining panels on the ceiling
C. Mount a total of (10) 2'x2' panels on the side walls - (5) on the left and
pleasing arrangement. The pattern in your room does not have to be
mirror around the walls and ceiling while you are sitting at the mix position. Anywhere you can see your studio monitors
largely subjective. The most popular choices
(for low frequency control) as well as 2'x2'x2" StudiofoamTM panels for absorption on the walls and ceiling.
The number of panels and placement on each surface can vary given your specific situation.
(5) on the right is encouraged, but not mandatory.
You may wish to continue to maximize your sound with products such as additional T'Fusor 3D Sound Diffusors, portable
horizontal, wall/ceiling corners.
E. Placement of T'Fusor 3D Sound Diffusors is
< [Pag.2]
Esta version es la html del arhivo pdf RMPPL, genearada por domotica.name desde www.auralex.com
Archivos relacionados:3wedge AlphaDST AudioTile24_ AudioTile96_ Auralex_Cata Auralex_LRAF D108L-DST D240xi-DST EPS-112T EPS-168T Eco_NAMM_1-1 Foamtak KlipschCaseS Platfoam ProPanel RC_Compariso RMD36 RMDPL RMP2 SFS-184 SonoSuede_HT SonoSuede_In SonoSuede_Pr SpaceArray SpaceCoupler Specificatio Specificatio Specificatio Specificatio SynAudCon Tubetak acoustics101 acoustology_ acoustology_ acoustology_ acoustology_ acoustology_ acoustology_ acoustology_ acoustology_ acoustology_ acoustology_ burntest famous foammsds lenrd mastertable pcf sbmale audio acousticmagic acousticsfirst amina aperionaudio audiocontrol audioquest audioshare.net auralex bowers-wilkins bryston.ca caryaudio casatools cascadeaudio chillsound conextionsystems definitivetech eliteavdist furmansound lindelectronics martinlogan monitoraudiousa mseaudio nilesaudio noble-fidelity phasetech psaudio puristaudiodesign qsonix russound sheersoundcable sherbourn sonance ticcorp triadspeakers truaudio vdn-otl
