RMP2 2 | Biblioteca audio auralex

TM Kit!

not mandatory. Around the mix position, you might want

your studio monitors in the reflection is a likely surface to treat with an Auralex

reflections are coming from. Simply have a friend move a mirror around the

Studiofoam panel!

nearfield monitors. The graphic illustrates one

level and on the ceiling for best results. The number of panels and placement on

possible pattern for Studiofoam on the ceiling.

This Starter Kit is designed to be the first step towards better acoustics. You may wish to continue to maximize your sound with products

Other General Suggestions

Check out the Auralex Catalog or go to Auralex.com for details on all the great Auralex sound control products!

Thank you for purchasing the Auralex Project Roominators

have been mounted to the door and can be seen

below). Note that in the illustration, two (2) panels

C. Mountatotalof12Studiofoampanelsonthesidewalls-six

focusing between the mix position and the

walls and ceiling while you are sitting at the mix position. Anywhere you can see

We highly recommend isolating your monitors with Auralex MoPADs. Even greater performance can be obtained by adding Auralex

to try using the "mirror" method to place panels (see

diffusors or a GRAMMA amp/sub isolation riser.

Remember that these are only guidelines. If you have furniture or gear in the way,

(6) on the left and six (6) on the right is encouraged, but

such as our T'Fusor 3D Sound Diffusors or portable products such as our MAX-WallTM Mobile Acoustical Environment.

nails, pins, screws, etc. can be used to mount the LENRDs or Studiofoam panels for easy removal later.

and Studiofoam in the room will improve your mixing or recording environment. Other, less permanent methods, such as VelcroTM,

When treating the front and side walls, try using a mirror to ascertain where

better in the illustration for step D.

D. Mounttheremainingpanelsontheceiling,

simply work around it as best you can. Auralex acoustic control products are very

each surface can vary given your specific situation.

Do not worry about placing treatments very low on the walls--use them at ear

forgiving. Placement on the walls is not an exact science. Just having LENRDs