background image
For superior acoustics, Auralex suggests mounting LENRDTM Bass Traps in the corners of your room
encouraged, but not mandatory. Around the mix
If your room is set up with a mix position against one wall ­ (preferably in the center of the shortest wall), please use the
arrangement. The pattern in your room does not have to be identical, but
and the back wall. You may desire to focus
by alleviating flat, reflective room surfaces with scientifically designed surfaces of varying shapes, sizes and angles.
The number of panels and placement on each surface can vary given your specific situation.
are either on the rear wall and rear portion
the reflection is a likely surface to treat with an Auralex Studiofoam panel!
mirror around the walls and ceiling while you are sitting at the mix position. Anywhere youcan see your studio monitors in
Visit the "FAQs" section of www.auralex.com for great tips and information about Auralex products and services.
the treatment on the ceiling between the mix
position, you might want to try using the "mirror"
When treating the front and side walls, try using a mirror to ascertain the reflection points. Simply have a friend move a
your corners, it is acceptable to place them in the horizontal, wall/ceiling
and behind the studio reference monitors. The graphic below illustrates
of the ceiling behind the mix position or centered between the listening position and the studio reference monitors as
Do not worry about placing treatments very low on the walls--use them at ear level and on the ceiling for best results.
A. Using FoamtakTM Spray Adhesive, mount two (2) LENRD Bass Traps in each vertical corner. We suggest you install
E. Placement of T'Fusor 3D Sound Diffusors is
similar coverage across this wall is strongly encouraged.
2" to 3" gap between the LENRDs so that you reap the benefits from the
C. Mount a total of (8) 2'x2' panels on the side
can. Auralex acoustic control products are very forgiving. Placement on the walls is not an exact science. Just having
permanent methods, such as VelcroTM, nails, pins, screws, etc. can be used to mount the LENRDs, Studiofoam panels or
the LENRDs starting at the ceiling. However, we understand that not all corners are the same. You may desire to leave a
You may wish to continue to maximize your sound with products such as additional T'Fusor 3D Sound Diffusors, portable
following general guidelines:
products such as our MAX-WallTM Mobile Acoustical Environment and isolation products such as a GRAMMA amp riser or
B. Using Foamtak, mount Studiofoam panels on the front wall, between
(8) 2'x2' panels mounted across the front wall, creating a visually pleasing
Remember that these are only guidelines. If you have furniture or gear in the way, simply work around it as best you
Other General Suggestions:
exposed edges. If you have doors, windows or other obstacles blocking
General Guidelines
Standing waves and flutter echoes are minimized without significantly reducing acoustic energy in the space.
largely subjective. The most popular choices
(for low frequency control) as well as 2'x2'x2" StudiofoamTM panels for absorption on the walls and ceiling.
position and the studio reference monitors.
MoPAD monitor isolation pads.
The Auralex Acoustics Roominators Deluxe Plus Kit
corners.
method to place panels (see below).
pictured. Be sure to rotate each T'Fusor 90o from the adjacent one for best results. T'Fusors combat hot spots and nulls
T'Fusors for easy removal later.
LENRDs, Studiofoam and T'Fusor Diffusors in the room will improve your mixing or recording environment. Other, less
D. Mount the remaining panels on the ceiling
walls - (4) on the left and (4) on the right is
Thanks again for purchasing the Auralex Roominators Deluxe Plus Kit!
< [Pag.2]  

Esta version es la html del arhivo pdf RMDPL, genearada por domotica.name desde www.auralex.com

Archivos relacionados:3wedge AlphaDST AudioTile24_ AudioTile96_ Auralex_Cata Auralex_LRAF D108L-DST D240xi-DST EPS-112T EPS-168T Eco_NAMM_1-1 Foamtak KlipschCaseS Platfoam ProPanel RC_Compariso RMD36 RMP2 RMPPL SFS-184 SonoSuede_HT SonoSuede_In SonoSuede_Pr SpaceArray SpaceCoupler Specificatio Specificatio Specificatio Specificatio SynAudCon Tubetak acoustics101 acoustology_ acoustology_ acoustology_ acoustology_ acoustology_ acoustology_ acoustology_ acoustology_ acoustology_ acoustology_ burntest famous foammsds lenrd mastertable pcf sbmale audio acousticmagic acousticsfirst amina aperionaudio audiocontrol audioquest audioshare.net auralex bowers-wilkins bryston.ca caryaudio casatools cascadeaudio chillsound conextionsystems definitivetech eliteavdist furmansound lindelectronics martinlogan monitoraudiousa mseaudio nilesaudio noble-fidelity phasetech psaudio puristaudiodesign qsonix russound sheersoundcable sherbourn sonance ticcorp triadspeakers truaudio vdn-otl