EPS-168T 4 | Biblioteca audio auralex

Wall

via email at

Within traced ProFusor outline, mark another

ProFusor

These are general recommendations. Should you have any additional questions about the installation of your

about these and other Total Sound ControlŽ products.

2.75"

Z-

Elite Pro System Installations

using drywall screws, as shown.

Marked inner

in from the outer edge on all sides. Install one

Make sure diffusor is level. Completely trace its

intended location with the back facing out.

Z-

appsupport@auralex.com or call 1-800-95-WEDGE.

rectangle 4" in from both sides, 5.25" down from

Outline

rectangle

outline.

the top and 2.75" up from the bottom. Install one

Hold the ProFusor to the wall or ceiling in its

using drywall screws, as shown.

Elite Pro System, feel free to contact an AuralexŽ Application Specialist

Traced

SetProFusorintoplace.

Clip in each corner of the marked inner rectangle

See the AuralexŽ Acoustics website, www.auralex.com, for more information

OnthebackoftheProFusor,markarectangle4"

Clip in each corner of the marked inner rectangle

5.25"